Adjusting The Rail System - Delta 36-6013 Manual De Instrucciones

Sliding Table Extension
Adjust the length of the saw table by using the table extnesion. Release the table by pulling side extension lock outward.
1.
For rip cuts betweeb 0 in. and 15 in., set rip fence on the black tabs. Use the black scale for cuts with the fence in this
position.
2.
For rip cuts between 10 and 25 in. place the fence on the white tabs.
3.
For rip cuts left of the blade place the fence on the blue tabs between 0 in. and 12 in.
See Figure 34 and 35.
MAKING ADJUSTMENTS
FIGURE 34
FIGURE 35
32