Idiomas disponibles
Idiomas disponibles
Reaction bar
Technical data
Product data
Ordering No
4220 1677 91
4220 1677 92
4220 1677 93
4220 1677 94
4220 1677 95
4220 1677 96
4220 1677 97
4220 1677 98
4220 1677 99
Declarations
Reaction bar
Reaction bars are not machines and do not bear CE marking
nor have a Declaration of Conformity. When a reaction bar is
fitted to an assembly power tool, the complete power tool, in-
cluding the reaction bar and any other accessories, shall com-
ply with the Machinery Directive; therefore, it is the power
tool which bears the CE mark and has a Declaration of Con-
formity.
Regional Requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
Safety
WARNING Read all warnings and all instructions.
Failure to follow all the instructions may result in
electric shock, fire and/or serious personal injury.
Ensure that you read and understand all instructions:
• Safety Information delivered together with the dif-
ferent parts of the system.
• Product Instructions for installation, operation and
maintenance of the different parts of the system.
• All locally legislated safety regulations with regard
to the system and parts thereof.
Save all safety information and instructions for fu-
ture reference.
Statement of use - reaction bar
This product is designed for absorbing the reaction torque of
assembly power tools.
No other use is permitted. For professional use only.
Maximum torque
180 Nm
180 Nm
180 Nm
180 Nm
180 Nm
180 Nm
180 Nm
180 Nm
180 Nm
www.P65Warnings.ca.gov
© Atlas Copco Industrial Technique AB - 9834 4275 00
Product specific instructions
General instructions
Operators of products with a torque reaction bar should take
particular care to avoid injuries due to crushing. For safety
reasons – never allow anyone to operate the product unless
trained and thoroughly familiar with how the product works
in different circumstances. The product may only be used to-
gether with the associated torque reaction bar which is
adapted to the screw joint application concerned.
WARNING Reaction bar
To avoid injuries like crushing or shearing:
Check the position of the reverse lever. Accidental
►
start in an unexpected direction may be harmful due
to the reaction bar.
Never put your hand on or close to the reaction
►
bar while the product is being used.
Operation instructions
• Make sure that the reaction bar is not cracked or dam-
aged in any way.
• Apply the reaction bar, opposite the direction of the
drive of the product, before starting the product.
• Never exceed the maximum torque marked on the reac-
tion bar.
Maintenance instructions
Daily maintenance: Visual inspection of the reaction bar is
recommended. Immediately replace cracked or damaged re-
action bars.
Cutting and welding reduces the lifetime of the reaction bar.
Safety Information
3
