Idiomas disponibles
Idiomas disponibles
LCD
Description
Display
OFF
Charging Port Fault
see
"Fault
Charging Port Fault
code"
see
Battery Box Assembly not
"Fault
functioning.
code"
see
"Fault
Start/stop Switch Fault
code"
see
"Fault
LCD Screen Fault
code"
Operator
Wrong starting process
interface
76
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC
Mower
Fault code
Status
on LCD
Indicator
n/a
Solid RED
n/a
Solid RED
n/a
Solid RED
204
n/a
217
n/a
310/410
OFF
201/202/203 OFF
314/414
OFF
315/415
OFF
Flashes
n/a
green
Audio
Cause
Indicator
The charging port
n/a
is in open circuit.
There is no
n/a
power supply.
The fuse is
n/a
blown.
The charging port
One beep
is in open circuit.
The power source
from Battery
Box assembly
One beep
is broken. The
LED headlights
and USB will not
work.
The connection
between Type C
wires of Battery
Box assembly
One beep
and other Type
C wires of the
mower is out of
work.
The BMS of the
One beep
Battery Box as-
sembly is broken.
Switch PCBA
failure or bad
One beep
wire connection
for Start/stop
Switch.
LCD assembly
is broken or bad
One beep
wire connection
of the LCD as-
sembly.
Depress the
accelerator pedal
before pulling
both paddles
n/a
towards the op-
erator simultane-
ously and then
release them.
Solution
Have repairs performed by a qualified
service technician.
Check the wall outlet whether there
is 120V supplied or the socket is good.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Start the mower properly following the
section " STARTING THE ELECTRIC
ZERO TURN MOWER ".
