Idiomas disponibles
Idiomas disponibles
PROBLEM
An abnormal sound is heard
when manually pushing the
mower without starting it.
The steering wheel cannot be
rotated.
The mower does not turn
left/right when the steering
wheel is rotated.
The mower fails to stop when
releasing the accelerator
pedal.
The CCS function cannot be
activated or turned off.
The mower fails to drive
reverse when left/right
paddle(s) is pulled toward the
operator.
70
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC
CAUSE
◾
The sound comes from the magnets inside the
driving motor.
◾
The steering wheel assembly is clogged with
debris.
◾
Failure of electronic or mechanical components.
◾
The return path of the accelerator pedal is clogged
with debris.
◾
The CCS button is pressed unintentionally while
driving. The mower is in cruise-control mode
◾
The CCS button is not pressed properly.
◾
The mower status indicator does not show green
and the mower is not ready for driving.
◾
The left/right paddle(s) is not pull toward the
operator properly.
◾
The left/right paddle(s) is not kept pulled toward
the operator.
◾
The left/right paddle(s) is broken.
SOLUTION
◾
It is normal and no action is needed.
◾
Check and remove the debris.
◾
Contact a qualified service technician for repair.
◾
Check and remove the debris.
◾
Check if the CCS icon is illuminated on the LCD
screen, and exit the CCS as necessary. Refer to
chapter "USING CRUISE CONTROL (CCS)"
◾
Press the CCS button until the CCS icon is illuminated
on the LCD screen, or disappears from the LCD
screen.
◾
Follow the section "STARTING THE ELECTRIC ZERO
TURN MOWER" to make the mower status indicator
show green and mower is ready for driving.
◾
Pull left paddle or right paddle or both paddles
simultaneously toward the operator until a "click"
sound is heard.
◾
To drive in reverse, at least one of the paddles has to
be kept pulled toward the operator.
◾
Contact a qualified service technician for repair.
