Idiomas disponibles
Idiomas disponibles
B. INSTALLING THE SEAT (FIG. 4)
The mower incorporates a safety interlock system that will stop the
drive motors and blade motors when the operator is unseated for
any reason while the mower is operating. This is a safety feature
designed to prevent runaway or accidental entanglement.
Required Tool (supplied): 6 mm Allen key
1. Remove the four socket-head screws from the accessory box
and set them aside.
2. Lay the seat on its side and insert the cable plug into the
socket on the bottom of the seat (Fig. 4a). This connects the
safety interlock system.
3. Rotate the two arm rests to the horizontal positions. Place the
seat closely against the front of the suspension base. Align the
two mounting holes in the seat with the holes in suspension
base and use the supplied Allen key to secure the seat to the
suspension base with the two supplied socket-head screws
(Fig. 4b).
4. Lift the seat position adjustment lever slightly and pull the seat
forward to expose the two backside mounting holes in the
steel rails of the seat assembly (Fig. 4b).
5. Use the supplied Allen key to thoroughly tighten the steel rails
onto the suspension base with the remaining two socket head
screws (Fig. 4c).
WARNING: When finishing tightening the two backside screws,
please check that there is no gap between the front part of the steel
rails and the suspension base.
6. Place the flexible cable into the hook as indicated by the
position label on the cable (Fig. 4d).
4a
4b
Socket-Head
Screws
4c
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC
Arm Rest
Allen Key
Steel Rails
Seat
Socket
Plug
Cable
Suspension
Base
Allen Key
Socket-Head
Screws
27
