DeWalt DCH072 Traducido De Las Instrucciones Originales página 29

Ocultar thumbs Ver también para DCH072:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
HEAVY‑DUTY SDS PLUS® ROTARY HAMMERDRILL
DCH072
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No‑load speed
No‑load beats per min
Single impact energy (EPTA 05/2009)
Optimum drilling range
Maximum diamter concrete
Tool holder
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN IEC 62841‑2‑6:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Drilling into concrete
Vibration emission value a
h, HD
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN IEC 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
WALT one of the
e
V
DC
min
‑1
bpm
J
mm
mm
kg
dB(A)
dB(A)
dB(A)
=
m/s
2
m/s
2
EC‑Declaration of Conformity
Machinery Directive
Heavy‑Duty Cordless Rotary Hammerdrill
DCH072
DCH072
12
D
WALT declares that these products described under
e
1
Technical Data are in compliance with:
Li‑Ion
2006/42/EC, EN62841-1:2015+A11:2022, EN IEC 62841-2-6:2020
+A11:2020.
0–910
These products also comply with Directive 2014/30/EU and
4280
2011/65/EU. For more information, please contact D
1.1
the following address or refer to the back of the manual.
4–10
The undersigned is responsible for compilation of the technical
14
file and makes this declaration on behalf of D
SDS plus®
1.7
Markus Rompel
93
Vice-President Engineering, PTE-Europe
D
WALT, Richard-Klinger-Straße 11,
101
e
65510, Idstein, Germany
3
30.12.2022
DECLARATION OF CONFORMITY
12.9
THE SUPPLY OF MACHINERY (SAFETY)
1.5
Heavy‑Duty Cordless Rotary Hammerdrill
D
WALT declares that these products described under
e
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015+A11:2022, EN IEC 62841-2-6:2020 +A11:2020.
These products conform to the following UK Regulations
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
REGULATIONS 2008
DCH072
WALT at the following
e
EnGLIsh
WALT at
e
WALT.
e
27
loading