1)
Gear switch
2)
Hour counter
3)
Ignition key
4)
Brushes motor switch
5)
Charge indicator
6)
Filter Buzzer Button
7)
Acoustic Indicator Button
8)
Working light switch (optional)
•
GEAR SWITCH :
Part. 1 The purpose of the gear switch lever is to move the machine forward or reverse . When the switch is in
forward position (arrow pointing up) by pressing the pedal Part. 3 Fig. 10 the machine moves forward . When
the switch lever is in reverse position (arrow pointing down) by pressing the pedal the machine moves reverse .
For safety reasons, the reverse speed is very low. If the switch is left in central position, the machine
moves neither forward nor in reverse .
•
FILTER BUZZER BUTTON:
Part. 6 This buzzer cleans the suction filters through a motor-vibrator Part. 2 Fig. 5; it must be pressed at
least 6 / 7 times for 8 / 10 seconds each (operation to be performed before starting work, before emptying the
bin and with the motor off); to perform this operation with motor running, close the suction by pulling the knob
Part. 1 Fig. 6.
•
ACOUSTIC INDICATOR BUTTON:
Part. 7 By pressing this button the acoustic indicator switches on .
•
BRUSHES MOTOR SWITCH:
Part. 4 By actioning this switch either central and side brushes are activated .
•
IGNITION KEY :
Part. 3 It activates the switchboard and in particular the movement potentiometer . It is therefore possible to
move the machine without have it working .
•
WORKING LIGHT SWITCH: Optional
Part. 8. It activates the adjustable working light .
•
CHARGE INDICATOR:
Part. 5 It indicates the charge level of batteries and it's represented by three coloured lights (red, yellow and
green); by turning on the ignition key Part. 6 they switch on in the following order: red-yellow-green; wait until
green light is on before forwarding or reversing. If red light should switch on batteries need recharging .
IT IS RECOMMENDED NOT TO WAIT UNTIL THE RED LIGHT TURNS ON TO PROCEED WITH
RECHARGING OF BATTERIES BUT TO PROCEED WITH THE OPERATION AS SOON AS
YELLOW LIGHT SWITCHES ON.
•
HOURCOUNTER:
Part. 2 Makes it visible the number of hours worked by the machine .
STANDARD FEATURES SWL-R 990 ET (battery model)
25