Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.3 SOFT-TOUCH KEY ACTIVATION
5.4 INTERCOM FUNCTION
5.4.1 How to transmit a call to the other internal
units
This function can be used to transmit a call to the other internal
units set to the same user code or set to another user code (for
programming see page
touch keys Art. Ex-9000H"
„ Press the programmed button to send the call
» If the system is busy: the
set to
set to
INT
1
5.5 SELF ACTIVATION FUNCTION
√ Self activation is possible only when the system is in standby
„ Press the Self activation button (
monitor the video from the external unit.
32
21 "4.2 Configuration Capacitive-
.
LED will flash 4 times
the system is busy
the system is busy
by default) to display on the
MAIN EXTERNAL
MAIN
EXTERNAL UNIT
UNIT
„ Touch to activate the function keys
5.4.2 How to answer a call from an internal unit
» On receipt of a call from the internal unit you will hear the
call ringtone. With "Privacy mode on" the internal unit will
ring in any case.
„ Press
to enter into communication with the caller
„ Press
again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
2
„ Press again to cycle through several cameras
If a call is underway with an external unit it is NOT possible
to cycle between the external units
MAIN
UNIT 1
MAIN
UNIT
UNIT
UNIT
1
cycle
cycle
UNIT 2
UNIT 3
UNIT
UNIT
2
3
Tabla de contenido
