Appendix; Warning; Important Safety Instructions; Fcc Class B Notice - Comelit HFX-9500M Manual Tecnico

7. Appendix

7.1 WARNING

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE MONITOR OR POWER ADAPTER TO WATER OR
MOISTURE.
CAUTION:
DO NOT OPEN. RISK OF ELECTRICAL SHOCK.
CAUTION!
TO REDUCE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER OR BACK, NO USER SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
OTHER WARNINGS
• Monitor is designed for indoor use only. Do not install outdoors.
• Keep the equipment dry. If water should get in, wipe off immediately. Water contains minerals that can erode electronic circuits.
• Intercom system is not operational during a power failure .
• Intercom system may be affected by radio frequency interference or EMl (electrical magnetic interference) in areas where broadcasting station
antennas are close by.
• Keep all wiring at least 1 foot away from fluorescent lighting, dimmer switches and AC power.
EXPLANATION OF TWO SYMBOLS
The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude to constitute risk of electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

7.2 IMPORTANT SAFETY INSTRUCTIONS

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE MONITOR OR POWER ADAPTER TO WATER OR
MOISTURE.
• Read Instructions -All the safety and operating instructions should be read before operating this equipment. These instructions should be retained
for future reference.
• Heed Warnings - All warnings on the equipment and in the operating instructions should be adhered to. All instructions regarding care and operation
of this equipment should be followed.
• Power Sources - Equipment should only be connected to the power supply specified in the operating instructions or as marked on the equipment.
• Power Cord Protection - Keep cable cords and plugs clear off other objects, particularly at the point where they exit the equipment.
• Cleaning - Clean the equipment by wiping with a soft cloth (do not use any abrasive agents or water).
• Non-use Periods - Power cords should be unplugged from the outlet when left unused for a long period of time.
• Object and Liquid Entry - Take care not to drop objects or liquids on any part of the equipment.
• Damage Requiring Service -The unit should be serviced by a qualified service personnel when:
• The power supply cord or the plug has been damaged or
• Objects have fallen, or liquid has been spilled onto the equipment or
• The equipment has been exposed to rain or
• The equipment does not appear to operate normally or exhibits a marked change in performance or
• The equipment has been dropped and/or the enclosure has been damaged.
• Servicing - Do not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to as
Qualified Distributor's Service Personnel.

7.3 FCC CLASS B NOTICE

NOTE:
This equipment has been Certified and found to comply with the limits regulated by FCC. and CE. Therefore, it is designed to provide reasonable
protection against interference and will not cause interference with other appliance usage. However, it is imperative that the user follows this
manuals guidelines to avoid improper usage which may result in damage to the unit, electrical shock, and fire hazard or injury. In order to improve the
feature functions and quality of the product, the specifications are subject to change without notice from time to time.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to connect the interference by one or more of the following measures:
• Reorient or relocate the monitor unit
• Increase the separation between the monitor and camera
• Connect the equipment on a separate outlet
• Consult the dealer or an experienced radio or television technician
36