Idiomas disponibles
Idiomas disponibles
17. Swivel the ratchet lever
lock the slider in the last possible recess. ATTENTION! All the
tension in the lashing is released at the same time!
18. Peculiarities of the ABS system: The SpanSet ratchet lashing
straps with the ABS system allow release of the initial tension
in small stages when the belt tension is relieved by the anti-belt
slip procedure. Move the ratchet lever into the release range.
Rocking the ratchet handle to and fro releases the initial tension
gradually. Opening the ratchet handle into the maximum position
makes the slotted shaft rotate freely, and the webbing can be
easily pulled out.
4.5 TFI (Tension Force Indicator)
SpanSet lashings straps for lashing down are optionally equipped with
TFI. The TFI is offered in three versions and indicates the achieved ten-
sion force in each case. Due to the precise knowledge of the tension
force, a targeted load securing is possible. The number of necessary
lashing straps can thus be determined and the working time reduced.
The TFI indicates the tension force achieved when the legs are
completely compressed: Green: 500 daN
15
1000 daN
.
5. Maintenance
– A visual inspection of the SpanSet lashing strap must be performed
and documented at defined intervals.
– The inspection and documentation takes place annually.
5.1 Repairs
– Repairs may only be performed by the manufacturer or a person
commissioned by the manufacturer.
5.2 Disposal
Dispose of SpanSet lashing straps via legally-compliant, proper and pro-
fessional recycling methods at the end of their life cycle. The disposal
must be performed in accordance with the relevant national legislati-
b
7
through 180° to the end stop to
V
13
, Red: 750 daN
14
, Yellow:
20
