Idiomas disponibles
Idiomas disponibles
– DIN EN 12195-2
In addition, other special regulations that go beyond these may apply,
e.g. for hazardous goods, or rail, sea and air transport.
3.4 Intended use
SpanSet lashing straps
– are lashing systems for bundling, down and diagonal lashing.
– may only be loaded up to the permissible tensile force stated on
label
III
– may only be used within certain temperature ranges: PES/PA -40°C
up to +100°C, PP -40°C up to +80°C
3.5 Prohibited use
$
Please find guide illustrations on the reverse of the envelope covering
the following points:
1
Use as slings / lifting loads
2
Tying knots in the lashing
3
Twisting the lashing
4
Use of worn or damaged SpanSet lashing straps
5
Applying bending force to clamps and fasteners
6
Applying loads to fasteners at the hook tips
7
Applying or pulling over sharp edges (An edge is sharp if the
radius „r" of the edge is less than or equal to the thickness „d" of
the lashing.)
8
Use with acids and/or alkalis
9
Exceeding the permitted tension (LC)
10
Tensioning the ratchet with lever extension
11
The combination of different components from different manu–
facturers is not permitted.
I SpanSet lashing straps must be taken out of service in the
I
following cases (cutting of the lashing, etc.):
– if label
is missing, damaged or illegible
III
- 1 European standard. Instructions and regulations may vary outside the scope of
validity.
15
„Load securing devices on road vehicles - Safety"
1
b
