Idiomas disponibles
Idiomas disponibles
Method of securing loads
The best method for securing loads depends on the object being secured
and the mounting options on the vehicle. The legislator demands that
loads must be secured for „normal driving" conditions, including emer-
gency braking, strong evasive manoeuvres and poor road conditions!
4.2 Before the first use
Carry out a visual examination for damages.
4.3 Before every use
1.
Have the operator's obligations according to 3.4 been complied
with?
2.
Visual inspection of the SpanSet lashing strap for damage and
dirt:
– Damaged SpanSet lashing straps must not be used.
– SpanSet lashing straps that can no longer be repaired
may not used and must be disposed of immediately.
– Clean dirty SpanSet lashing straps.
3.
Dry damp or wet SpanSet lashing straps in a ventilated room
before use.
4.
Check that the identification and dimensions of the SpanSet
lashing strap are suitable for the intended use
(see information on label
5.
Note: The textile belt material can stain, so protect sensitive
goods.
4.4 Use
4.4.1 Selection of suitable SpanSet lashing straps
In selection of belts you must consider on the following criteria:
The selected lashing strap must be strong enough for the intended use,
possibly have a sufficient STF, have the appropriate fasteners and have
the correct length with regard to the lashing method.
4.4.2 Lashing procedure
#
CAUTION
17
III
Risk of injury during lashing
)
b
