Menu Operation; Channel Setup; Video Menu - Hitachi LE32M4S9 Manual Del Propietário

Menu Operation

The main menu contains six submenus, which are
CHANNEL, VIDEO, AUDIO, TIME, SETUP and LOCK(
see Figure 3).
CHANNEL
Press MENU to display the main menu and select
CHANNEL, then press OK to confirm. The Channels
options are as follows:
Tuner
Press OK to select Air or Cable.
Auto Channel Scan
1. Select CHANNEL > Auto Channel Scan and press
OK to enter.
2. Press to select Scan all channels, Digital
channels only, or Analog channels only, then press
OK to start the channel scan.
3. The serach process may take a few minutes. During
the process, you can press MENU or EXIT to stop the
channel scan.
4. After the channel scan, channels are arranged in a
preset order.
Note: The default password is "0000". If you have
set the password to a personal setting and
have forgotten it, you can use "7777", which is
the master password to override the existing
password.
DTV Manual Tuning
This feature allows you to scan and add digital channels
manually (by channel number).
1. Select CHANNEL > DTV Manual Tuning and then press
OK to enter.
2. Press to select a channel number.
3. Press OK to start the channel scan, if the channel is
found it will automatically be added to the channel list
in the Channel Manager.
4. Press MENU to return or EXIT to close the menu.
ATV Manual Tuning
This feature allows you scan and add analog channels
manually (by channel number).
1. Select CHANNEL > ATV Manual Tuning, then press OK
to enter.
2. Press to select a channel number.
Note: Use the Fine-Tune function to fine tune the channel
if the picture is not clear.
3. Press the RED button on the remote control to save
the channel to the channel list.
4. Press MENU to return or press EXIT to close the menu.
Channel Manager
1. Select CHANNEL > Channel Manager and press OK to
enter.
2. Press to select a channel. Press FAV on the remote
control to set or delete the selected channel as a
favourite channel.
3. Press the RED button on the remote control to save
the channel to the channel list in the Channel Manager.
4. Press MENU to return or press EXIT to close the menu.
VIDEO
The Video menu allows you to adjust the picture settings
according to your preference. Press MENU and select
VIDEO, then press OK to confirm. The Video options are
as follows:
Picture Mode
Press OK to enter the Picture Mode menu. Then press
to select your desired picture mode (Dynamic, Standard,
Movie, or Custom).
Color Temperature
Use this feature to adjust the color temperature of the
picture. Press OK to enter the menu and then press
to select:
Cool: For a less intense color with more blue.
Standard: For a more natural color.
Warm: For a more warm color with more red.
Aspect Ratio
Press OK to enter the Aspect Ratio menu. Press
select a desired aspect ratio (Auto, Normal, Wide, and
Full).
Note: Depending on the signal source, some aspect
ratios may not be available.
Noise Reduction
The Noise Reduction function automatically reduces
conspicuous noise in the picture without degrading picture
quality. Set Noise Reduction to Off if you see individual
blocks in the picture.
MPEG Noise Reduction
The MPEG NR (Noise Reduction) function automatically
reduces block noise in the picture without degrading picture
quality.
Dynamic Contrast
Use this feature to change the black level automatically
according to the brightness of an image. The black level will
become dark in a dark scene.
to
15 EN