Craftsman 247.25001 Manual Del Operador página 62

Craftsman Zero-Turn Rider Model 247.25001
777S34190
777S32599
777I22281
777I22489
Release Both Transmission Release
Levers Before Moving Vehicle
To Drive (Transmission
Engage), Lift Rod Into
Large Opening And
Release.
To Push (Transmission
Disengage), Lift Rod
Through Large Opening,
Push Down.
PARTS LIST
777D16806
777D16807
S33820
I22489 AC
777S33084
STARTING INSTRUCTIONS FOR FIRST-TIME OPERATORS
• To START, PARK BRAKE must be set • Start Off In A Flat, Open Area.
• P.T.O. switch in OFF (down) position • Keep Bystanders Away.
• Set Throttle At A Low Speed.
• Lap bars in NEUTRAL and outward positions
• Throttle set properly, CHOKE position if "cold" • Practice Maneuvering, (Forward,
• Turn key to ON, then START, release when engine runs Reverse, Left, Right) Without Deck Engaged.
NOTICE METER MINDER
• PTO Automatically Disengages When Both Lap Every 50 Hours of Use a "Change Oil"
Bars AreMoved Into Reverse. Message Will Flash On The Display For 2
Minutes Every Time The Tractor Is
• PTO Automatically Reengages When Levers Are
Returned To The Neutral Or Forward Positions. Started. Follow The Oil Change Intervals
Provided In The Engine Manual.
Key
PTO
HANDLE
OPERATION
777I22973
777I23134
FAST
SLOW
777D15546
D15546
62
777S33896
KEEP HANDS AND FEET
AWAY. DO NOT OPERATE
MOWER UNLESS CHUTE
DEFLECTOR OR ENTIRE
GRASS CATCHER IS IN
ITS PROPER PLACE.
S33896
ASSEMBLE CHUTE
DEFLECTOR TO THIS UNIT
BEFORE OPERATING.
777D16808
777I22885
HOURS 1/10
777D16809
42"
cutting deck
777X44930 (On units produced
on or before Dec. 31, 2011)
EMISSION CONTROL INFORMATION
MTD CONSUMER GROUP INC.
This equipment meets U.S. EPA EVP
regulations for 2011 model year.
EVP Family: BMTDPNHEQNC1
X44930
777X45529 (On units produced
on or after Jan. 1, 2011)
EMISSION CONTROL INFORMATION
MTD CONSUMER GROUP INC.
This equipment meets U.S. EPA EVP
regulations for 2012 model year.
EVP Family: CMTDPNHEQNC1
X45529