Porsche Mobile Charger Connect Manual De Instrucciones página 77

1. Select Configure hotspot.
2. In Settings, enter the network name and security
code of the hotspot.
e
For information on establishing a hotspot con-
nection, g Refer to chapter "Opening the web
application" on page 73..
WiFi
Information
If the charger is already connected to your device
via a hotspot, you cannot simultaneously establish a
connection to the WiFi network. You must disable the
hotspot first.
1. Enable WiFi.
2. Select option Connect to network.
3. Select your network from the list and enter the
Security code. Other network: Select this if you
are using a network that is not on the list.
4. Choose whether to have the IP address assigned
automatically (recommended).
�� The IP address appears once the connection
to the network is established.
The status Connected appears by the net-
work on the list.
Managing WiFi networks
Option Explanation
e
Other network
Select this if your
network is not on
the list.
e
Manage known net-
Select Delete to
works
remove saved net-
works. This way,
the charger will be
in the correct net-
work.
Disconnecting from the network
1. Select the network that is currently connected.
2. Select Disconnect to disconnect from the WiFi
network.
Configuring a network connection
1. Select the network that is currently connected.
2. Select Configure to change the settings to the
IPv4 address and the DNS server.
Information
A 2.4-GHz frequency band is used for the network
connection. In the event of connection problems,
disable the 5-GHz frequency band on the network
router.
PowerLine Communication
As an alternative to WiFi, your charger can be con-
nected to the home network via a PLC connection.
For this to happen, the existing mains supply is
used to set up a local network for data transfer. The
charger is registered as a client in the PLC network.
To establish a connection, the charger and PLC mo-
dem can be connected to one another via their pair-
ing buttons. In this case, the charger is automatically
paired with the PLC modem. Another connection
method is to enter the security code of the charger
on the PLC modem.
1. Activate Powerline Communication (PLC).
2. Add the charger to the PLC network:
–
Option 1: with the pairing button:
a. In the Web Application, select Establish
connection with PLC push method.
b. Select Start pairing.
c. To establish a connection, press the pair-
ing button on the PLC modem within 2 mi-
nutes.
d. Select the Connect button to confirm
pairing.
– Option 2: by entering the PLC security code:
a. Select option Establish connection with
PLC security code. The security code is dis-
played.
b. Enter the security code in the settings of
your PLC modem.
�� The charger is integrated in the PLC network
and a connection is established.
Operating
75