Limiting The Range Of Cleaning - Makita DRC300 Manual De Instrucciones

4. Tap on [Save] to finalize the name.

Limiting the range of cleaning

WARNING
Do not use the cleaning prohibited area configured by the app as a
boundary line of an area where an accident can possibly happen due to
intrusion or fall.
• Doing so can cause an accident or injury due to intrusion or fall of the
robotic cleaner. The actual trajectory of the robotic cleaner may be slightly
different from the cleaning prohibited area setting.
For an area with a risk of intrusion or fall of the robotic cleaner, place an
object serving as a wall with a height of 25 cm (9-7/8") or more (an object
that does not move or fall over when hit by the robotic cleaner) on a flat
surface. (See page 10.)
1. On the [Area Settings] screen, tap on the mapping information you want to
change.
2. Tap on at the side of [Prohibited Area].
3. Set a cleaning prohibited area.
• You can tap on at the upper right corner of the screen to add a cleaning
prohibited area (up to 100 areas).
• You can drag a cleaning prohibited area to move it.
• You can drag the lower right corner of a cleaning prohibited area to adjust the
size.
• You can tap on at the upper left corner of a cleaning prohibited area to
delete the cleaning prohibited area.
• You can tap on at the upper right corner of the screen to delete all of the cleaning
prohibited areas.
• You cannot set a cleaning prohibited area within a 2 m (6.56 ft) range around
the starting point.
• Depending on the environment near a cleaning prohibited area you set, it may
not be possible to clean an area around the specified area.
4. Tapping on [Save] results in the modified mapping information being
registered.
5. To enable registered cleaning prohibited area, tap on On/Off (colored green
when it is On) at the side of [Prohibited Area].
40 ENGLISH