4.3 Charging the battery
Only use the power adaptor and cable that came with the breast pump. An inadequate
power source or cable may result in a fire hazard, electric shock or malfunction equipment.
10
Refer to figure ¢2 on the foldout pages.
Charge the battery for two hours before using the breast pump for the first time.
1. ¢2-01 Connect the power cable to the motor unit.
2. ¢2-02 Connect the power cable to the power adaptor.
3. ¢2-03 Plug the power adaptor into a wall outlet.
Æ The battery display shows all three bars when charging is complete.
For details on the battery display see chapter 8.3.
You can use the breast pump while charging the battery. However, it will charge in a slower
mode when the pump is running.
5. Disassembling your collection cups
Refer to figure ¢3 on the foldout pages.
1. ¢3-01 Open the collection cup using the tabs at the bottom.
2. ¢3-02 Remove the yellow membrane from the breast shield.
WARNING
Information