Before Using For The Fi Rst Time; After Each Use - Medela Harmony Instrucciones De Uso

1. Cleaning
1.1 Before using for the fi rst time
Clean and sanitize the parts below before using
your pump for the fi rst time. Follow the cleaning
and sanitizing instructions in Sections 1.2
(start at step 4) and 1.3 that follow.
• Handle, Diaphragm, • Pump Body
Stem, O-Ring
Assembly
• White membrane • Yellow valve
• Breastmilk bottle • Breastshield
and lid
Caution
• Only use drinking-quality tap or bottled
water for cleaning.
• Take apart and wash all parts that
come in contact with the breast and
breastmilk immediately after use to
avoid dry up of milk residues and to
prevent growth of bacteria.
• Pay special attention to O-Ring during
disassembly and cleaning to avoid
losing or damaging.
6
All manuals and user guides at all-guides.com

1.2 After each use

Clean all parts that come in contact
with your breast and breastmilk.
1
Separate breastshield from
pump body.
4
Rinse in cool water all separated
parts that came in contact with
breast and breastmilk in order to
remove breastmilk residue.
• Mild Dish Soap
Supplies Needed:
• Clean Dish Towel or
Soft Brush
2
Twist and pull the yellow valve off
the pump body.
Washing Options:
Washing in sink:
5
• Soak all separated parts in • You may wash
warm soapy water for
your kit parts
5 minutes.
by following the
• Clean with a clean dish-cloth
instructions on
or soft brush. the Quick Clean
Breastmilk
• Rinse all separated parts
with clear water. Removal Soap
bottle.
• Allow all parts to air dry in
a clean area.
• Store dry parts when not in use.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
• Clean Sink or Bowl
• Drinking Quality
Water
3
Remove the white membrane
from the yellow valve.
Washing in dishwasher:
or
• Wash all separated parts
on top rack of dishwasher.
• Allow all breastpump parts
to air dry in a clean area.
™
• Store dry parts when
not in use.
7