6.2 Washing
Refer to figure ¢4 on the foldout pages.
Rinse and wash by hand
(before first use and after each use)
Do not place the parts directly in the
kitchen sink for rinsing and washing. Use
a dedicated wash basin for infant items.
1. Rinse the disassembled parts,
except for the tubing, with cold
clear drinking-quality water
(approx. 68 °F/20 °C).
2. Clean these parts with plenty
of warm, soapy water (approx.
86 °F/30 °C). Use a commercially
available dish soap and clean
soft brush.
3. Rinse the parts with cold clear
drinking-quality water for 10 to
15 seconds (approx. 68 °F/20 °C).
4. Allow to completely dry after washing.
Drying
4. Dry
1. Allow to air-dry on a clean, unused dish towel or paper towel.
Air-dry
Allow to air-dry on a clean, unused dish
towel or paper towel. Store the dry parts
in a clean environment.
Do not store parts in an airtight
container/bag if moist. It is important that
all residual moisture dries.
Wash in dishwasher
(maximum once per day)
or
1. Place the disassembled parts, except
for the tubing, on the top rack or in the
cutlery section. Use a commercially
available dishwashing detergent.
2. Rinse the yellow membrane under
running water after dishwashing.
3. Allow to completely dry after washing.
i
Information
If using the dishwasher, parts may
become discolored. This will not
impact the functioning of the parts.
Do not routinely wash the tubing.
See chapter 6.5 for more details.
13
7