operations are generally the following:
- replacements of the mechanical seal
- replacement of the sealing rings
- replacement of bearings
- replacement of capacitors
for which it is necessary to contact the dealer or the after-
sales service.
8. IDENTIFIED RISKS AND RESIDUAL RISKS
This pump is ATEX-certified, therefore an appropriate risk
analysis has been prepared. The main risks identified are:
- dry operation
- operation with obstructed or closed delivery valve, or
operation with flow rate lower than the minimum required
flow rate
- operation with high temperature fluids
- operation at a speed higher than the nominal one
All of these risks have been detailed in section 6. INSTALLATION
AND USE.
No residual risks have been identified for which appropriate
indications have not been provided in this manual.
EN
11