Cleaning The Travel Mug After Use; My" Function ("Hot" Beverages Only) U - DeLonghi ELETTA EXPLORE ECAM45.5Y Serie Instrucciones De Uso

3. Press "To Go" (B2);
The first time you use the function:
• Press "Start";
• Pressing displays information on the quantities
corresponding to the size of the travel mug;
• Select the size of travel mug you are using (Small, Medium,
Large) and press "Next";
• The appliance informs you that at the end of preparation,
you can adjust the quantity to save the exact capacity of
your mug. Press "Next".
4. Select the type of beverage you want to make (Hot (B3)
or Cold (B1));
5. Scroll through the beverages on the homepage (C) until
the one you want to make is displayed. Select the beverage
and customize the parameters proposed by the appliance.
Proceed with preparation;
6. At the end of preparation, you can correct the quantity de-
livered so the next time the machine will make the right
amount of beverage for the travel mug you are using.
Please note:
• Each time you use a mug different from the one used pre-
viously, we recommend you remain nearby to check the
quantity of beverage delivered.
• If you save the new settings, they are memorised ONLY in
the selected profile.
• To maintain the temperature of hot beverages, preheat the
travel mug with hot water.
• You should only use the travel mug for the beverages pres-
ent on the homepage.
• To use a travel mug other than the one supplied, make sure
it is no taller than 6.3 in/16 cm.
Important
• Before screwing on the lid, open the closing cap to release
the pressure;
• Recipes with milk: at the end of preparation, clean the
milk carafe (see section "10.6 Cleaning the milk carafe after
use").
27
17
• You should use the contents within a maximum of 2 hours.
After that time, empty and clean as described in the fol-
lowing section.
• For more information, see the leaflet attached to the travel
mug.

13.1 Cleaning the travel mug after use

For hygiene reasons, the travel mug (D9) should always be
cleaned after use. Do not use abrasive materials that could dam-
age the surface of the container.
Proceed as follows:
1. Unscrew the lid and rinse the container and lid with hot
water (104°F/40°C).
2. Soak the components in hot water (104°F/40°C) with
mild detergent for at least 30 minutes. Do not use scented
detergents.
3. Clean the inside of the container and the lid with a clean
sponge and mild detergent removing any visible dirt.
4. Rinse all components with hot water (104°F/40°C)
5. Dry all components with a clean, dry cloth or paper towels,
then reassemble.
6. Wash the lid in the dishwasher once a week. The metal
container is not dishwasher safe

14. "MY" FUNCTION ("Hot" beverages only) U

With the "my function", you can customize the beverage as
follows:
1. Make sure the profile (C5) whose beverage you want to
customize is active;
2. Press (C2) at the bottom of the image corresponding
to the beverage you want to make;
3. Press ;
4. Press "Start" to follow the guided procedure;
5. If envisaged by the beverage, select the desired Strength
and press "Next";
6. Press "Brew" to begin preparation;
7. When the required quantity has been delivered into the
cup, press "Stop".
8. If you are satisfied with the result in the cup, press "Save"
to save the settings, or "Cancel" to retain the previous
parameters.
9. Press "X" to go back to the homepage.
The appliance goes back to the homepage (C).
Please note:
• If you save the new settings, they are memorised ONLY in
the selected profile.
• When you customize a single beverage, the respective
double version is also customized and the appliance dis-
plays the message "Settings saved on both double and
single recipe";