Making Coffee Using Pre-Ground Coffee; General Indications For Making Coffee Beverages; Tips For A Hotter Coffee; Coffee Pot - DeLonghi ELETTA EXPLORE ECAM45.5Y Serie Instrucciones De Uso

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

the quantity of ice cubes indicated to the glass (fig. 14),
then press "Brew".
• The appliance starts making the beverage and a de-
scription of each individual phase (grinding, brewing
coffee) appears on the display.
3. At the end of delivery, press "Save" to save the new set-
tings, or "Cancel" to retain the previous parameters.
Please note:
If you save the new settings, they are memorised ONLY in the
selected profile.
4. Press "X" to go back to the homepage (C).
The appliance is ready to be used again.

9.4 Making coffee using pre-ground coffee

Important!
Never add pre-ground coffee when the machine is off or it
could spread through the inside of the machine and dirty
it. This could damage the machine.
Never use more than 1 level measuring spoon (D2) as it
could soil the inside of the coffee machine or block the
funnel (A4).
When using pre-ground coffee, only one cup can be made at a
time.
Making Long coffee: halfway through preparation, when
requested by the appliance, add one level measuring
spoon of pre-ground coffee and press "OK".
You cannot make Doppio+, 2x Espresso, Coffee Pot or
Cappuccino+ beverages using pre-ground coffee.
1. Press
(C2) at the bottom of the image corresponding
to the coffee you want to make (e.g. espresso, fig. 15). The
parameters that can be customized according to taste ap-
pear on the display;
2. Select the quantity and pre-ground coffee
3. Press "Brew";
4. Lift the pre-ground coffee funnel lid, make sure the funnel
(A4) is not blocked, then add one level measuring spoon
(D2) of pre-ground coffee (fig. 16). Press "OK" to make the
beverage;
;
16
13
5. The appliance starts making the beverage and a descrip-
tion of each individual phase (grinding, brewing coffee)
appears on the display.
At the end of preparation, the appliance is ready to make the
next beverage.
9.5 General indications for making coffee
beverages
A quantity of water above level 1 is sufficient to complete
most beverages. Always filling above level 1 allows the ap-
pliance to estimate the amount of water available to make
the beverages.
While the machine is making the coffee, preparation can be
interrupted at any moment by pressing "Stop" or "Cancel".
As soon as delivery has ended, to increase the quantity
of coffee, just press "Extra". When the required quantity is
reached, press "Stop" or "Cancel".
Various alarm messages could be displayed while using
the appliance ("Please fill the tank with fresh water up to
MAX level" etc.). Their meaning is explained in section "21.
Displayed messages".
If the coffee is delivered a drop at a time, too weak and not
creamy enough, or too cold, consult the tutorial on how
to adjust grinding) (see section "7.4 Adjust grinder") and
section "22. Troubleshooting".
If "Energy Saving" mode is activated, there may be a few
seconds delay before the first coffee is delivered.

9.6 Tips for a hotter coffee

To make a hotter coffee, proceed as follows:
perform a rinse cycle before making the coffee (section
"7.1 Rinsing");
warm the cups with hot water using the hot water function
(see section "11. Preparing hot water and hot tea");
increase the coffee temperature (section "7.5 Coffee
temperature").

9.7 Coffee pot

Optional accessory in certain models:
To make the beverage, proceed as follows:
1. On the homepage (C), press the image corresponding to
the "Coffee Pot" beverage (C1);
2. Select the number of cups to make and the desired
strength;
Pot
(capacity 33.81 fl oz/1 liter)
Type: DLSC021
EAN: 8004399333642
Tabla de contenido
loading

Este manual también es adecuado para:

Eletta explore ecam45.7y serie

Tabla de contenido