How to charge the boat's batteries
A mains adapter and a 16A/250V charging cable are supplied with the boat.
NOTE: Refer to the Torqeedo user manual, chapter charging a low voltage battery.
1
1
2
Move the engine starter to
position (1)
4
Connect the power cable to the dock power
outlet (1).
The charging process will start automatically.
614225 -
USING YOUR BOAT
2
Pull the circuit breaker cable
1
RECHARGE THE BATTERY(IES) AFTER EACH VOYAGE.
WARNING!!!
RISK OF FIRE AND BURNS FROM OVERHEATING OR HOT SURFACES ON THE
COMPONENTS.
FIRE AND HOT SURFACES CAN CAUSE DEATH OR SERIOUS PHYSICAL INJURY.
- DO NOT STORE FLAMMABLE OBJECTS IN THE AREA OF HIGH VOLTAGE
EQUIPMENT.
- IF THE SYSTEM BECOMES VERY HOT OR IF YOU SEE STEAM OR SMOKE,
TURN THE SYSTEM OFF IMMEDIATELY.
- DURING OR IMMEDIATELY AFTER A TRIP, DO NOT TOUCH ANY MOTOR OR
BATTERY COMPONENTS.
- AVOID LARGE MECHANICAL FORCES ON THE SYSTEM'S BATTERIES AND
CABLES.
ONLY USE THE CHARGING CABLES SUPPLIED BY ZODIAC.
UNWIND THE CABLE COMPLETELY BEFORE CHARGING
5
Turn the charge switch to the "ON" position.
Page 20 / 33
3
Isolator switch set to "OFF",
powered down
Edition 1