IV - How to drive your boat
Before starting, refer to the Owner's Manual Volume I.
NOTE: Check that the buoyancy tube is correctly inflated.
1
Battery switch set to "ON"
3
Slide on and connect the stop switch
lanyard*
* If the pilot falls overboard, immediately stopping the engine considerably reduces the risks of serious
or fatal injury caused by being run over by the boat. Always connect both ends of the stop switch
lanyard correctly.
DANGER!
Immediately turn off the engine as soon as a swimmer comes close to the
boat. They risk being seriously injured by a rotating propeller.
WARNING!
When underway, keep all lockers, deck hatches and the tank access hatch
closed.
BREAKING WAVES CAN BE A SIGNIFICANT DANGER FOR STABILITY AND
CAUSE FLOODING.
- If a deck hatch seal is damaged, please contact your dealer to replace it as
soon as possible.
- Avoid abrupt manoeuvres at full speed. Reduce speed in waves for the
comfort and safety of passengers.
HOW TO DRIVE YOUR BOAT
2
Fuel valve to "ON".
4
Throttle lever on neutral.
Page 29 / 73
5
Operate the starter.
Issue 3
E
N
G
L
I
S
H