Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION AND CIRCUITS – Electricity
The flow rate of your pump is about 35 litres per minute. It may be accessed via the after locker.
1. Electric sensor
2. Pump casing
3. Intake strainer
Set the switch to automatic position, place your finger over the sensor (1) for several seconds to check
the pump is activated correctly.
Clean the intake strainer if necessary (2).
WARNING
NAVIGATION LIGHTS
Actuate this 3-position button to light the navigation
lights.
Off position.
White light position.
White light, red light, and green light
position.
DECK LIGHTS
Actuate this button to turn on the external deck
lighting.
1
Dry
carefully
CHECK THE OPERATION OF THE BILGE PUMP AT REGULAR
INTERVALS. CLEAN THE INTAKE STRAINERS OF ANY DEBRIS
LIABLE TO CAUSE A BLOCKAGE.
2
Disconnect the grill,
Clean the strainer/propeller
of any debris liable to cause
a blockage with hot soapy
water.
2
3
1
Tabla de contenido
