FONESTAR ZS-2000M Manual De Instrucciones página 5

PREPARING AUXILIARY MATERIALS
Prepare the following auxiliary materials before installing the system equipment:
- Insulating tape
- Wire buckles
- Cable labels
- Plastic ties
PREPARING CABLES AND AUXILIARY EQUIPMENT
Note: It is recommended to select high quality and professional-grade transmission cables for large
scale loudspeaker systems.
The longer the distance, the thicker the cable must be used, as more power is required to
transmit. Please select appropriate cables according to the distances involved.
Prepare the following cables and auxiliary equipments before installing the system equipment:
- CAT-5 Ethernet cable
Cables are required to be no longer than 100m with diameters of 0.51mm (wire gauge of 24AWG). Shiel-
ded twisted pair cables are recommended. The connectors should comply with TIA/EIA 568A or TIA/EIA
568B, and the cable can be straight through or cross.
Refer to Table 1 for the Ethernet pin types.
- 4 wires RS-485 cable
Cables are required to be no longer than 1000m with diameters of 0.51mm (wire gauge of 24AWG). Twis-
ted pair cables are recommended.
- 100V audio connection cable
This cable is used to connect the ZS-2000M to the ZS-1500/ ZS-2250/ ZS-4125 as well as the ZS-2000M
to the loudspeakers in the broadcasting zones. Shielded cables with a cross- section of 1.3mm2 (wire
gauge of 16AWG) are recommended to connect the external sound source devices, such as CD/DVD pla-
yers and tuners
Table 1 RJ45 Cable Pin Definition Descriptions
Table 2 RS-485 Cable Pin Definition Descriptions
- 5 -
EN