FONESTAR ZS-2000M Manual De Instrucciones página 18

EN
Connecting the ZS-2000M and ZS-4328IO to the ZS-200M through a Network Switch
Connect the ZS-2000M and ZS-4328IO to the ZS-200M through a network switch. The ZS-2000M and
network switch must be on the same network. Refer to Figure 28:
Figure 28 Schematic Diagram of Connecting the ZS-2000M and ZS-4328IO to the ZS-200M Through a
The ZS-200M can get the power supply from ZS-2000M directly. Connect one end of the prepared standby
power supply cable to the ZS-2000M standby power supply output port, and connect the other end of the
cable into the ZS-200M power supply input port. Refer to Figure 29:
Figure 29 Schematic Diagram of Connecting the ZS-2000M and ZS-4328IO to the ZS-200M Through a
Network Switch mode 1
Network Switch mode 2
- 18 -