Initial Settings; Adjusting Initial Settings; Selecting The Display Language; Setting The Date - Pioneer DEH-P85BT Manual De Instrucciones

Section
02 Operating this unit

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press MULTI-CONTROL and hold until
Language select appears in the display.
# You can also perform this operation by press-
ing and holding FUNCTION on the remote con-
trol.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL to switch between the
functions in the following order:
Language select (language selection)—
Calendar (calendar)—Clock (clock)—
Off clock (off clock)—FM step (FM tuning
step)—Auto PI (auto PI seek)—Warning tone
(warning tone)—Face auto open (face auto
open)—AUX1 (auxiliary input 1)—AUX2 (aux-
iliary input 2)—Dimmer (dimmer)—
Brightness (brightness)—S/W control (rear
output and subwoofer controller)—Mute
(sound muting/attenuation)—Demonstration
(feature demo)—Reverse mode (reverse
mode)—Ever-scroll (ever scroll)—BT AUDIO
(Bluetooth audio)—Pin code input (pin code
input)—Edit device name (device name edit)
—BT Version Info. (Bluetooth version infor-
mation)—BT reset (Bluetooth reset)
Use the following instructions to operate each
particular setting.
48
En
1 1 1
# You can also select the function by pressing
FUNCTION on the remote control.
# To cancel initial settings, press BAND.
# You cannot select BT AUDIO when the Blue-
tooth audio player has been connected.

Selecting the display language

For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
1 Use MULTI-CONTROL to select
Language select.
2 Press MULTI-CONTROL to select the lan-
guage.
Each press of MULTI-CONTROL selects lan-
guages in the following order:
English—Français—Italiano—Español—
Deutsch—Nederlands—РУССКИЙ

Setting the date

The calender display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1 Use MULTI-CONTROL to select
Calendar.
2 Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day—Month—Year
As you select segments of the calendar dis-
play the segment selected will blink.
3 Push MULTI-CONTROL up or down to
set the date.

Setting the clock

Use these instructions to set the clock.
1 Use MULTI-CONTROL to select Clock.