Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TUNER
Selecting SIRIUS Satellite Radio
AV receiver
On the AV receiver, press the
[TUNER] button repeatedly to
select "SIRIUS".
Remote
On the remote controller, press
controller
the [TUNER] button repeatedly to
select "SIRIUS".
If "CHECK SIRIUS TUNER" appears
on the display, make sure the Sirius-
Connect receiver is connected properly.
If "ANTENNA ERROR" appears,
make sure the antenna is connected
properly.
Signing Up for SIRIUS Satellite Radio
Before you can use SIRIUS Satellite Radio, you must
first sign up for an account. You'll need a major credit
card and your SIRIUS Satellite Radio ID, which you can
get from the AV receiver, as explained below, or from the
SiriusConnect Home tuner package.
1
Use the TUNING Up and Down
[q]/[w] buttons to select
AV receiver
channel 0.
Your SIRIUS Satellite Radio ID num-
ber is displayed. Write it below.
ID
2
To sign up, go to:
http://activate.siriusradio.com
Or call: 1-888-539-SIRIUS (7474)
Note:
Your ID is also displayed on the Satellite Radio screen.
See "Positioning the SiriusConnect Home antenna" on
page 9
All manuals and user guides at all-guides.com
TUNING
/
Selecting SIRIUS Satellite Radio Channels
There are three ways to select SIRIUS Satellite Radio
channels:
1. Channel Search mode: select any channel.
2. Category Search mode: select channels by cate-
gory.
3. Direct tuning: enter channel number.
ENTER
Number
buttons
D.TUN
■ Channel Search Mode
1
Press the [TUNER] button, and
then press the [ENTER] button
repeatedly to select Channel
Search mode.
This procedure can also be performed
on the AV receiver by using its
[TUNER] button, and [TUNING
MODE] button.
2
Use the Up and Down [q]/[w] but-
tons to select a channel.
You can also use the Left and Right
[e]/[r] buttons to select a category.
TUNER
Channel number
Channel name
En-
3
Tabla de contenido
