Harvia Nova SWA20U1XA Instrucciones De Instalacion Y Uso página 51

Additional settings
Open the settings menu by simultaneously pressing the -, MENU and + buttons. Press for 5
seconds. Note! Buttons are not lit when the control unit is in standby mode.
Maximum on-time. The maximum on-time can be changed with the buttons - and +. The range
S-01
is 1–12 hours (factory setting 1h).
1:00
Press the MENU button
Memory for power failures. Options after a power failure are:
S-02
• ON1: The device restarts. Timer continues from where it was before power failure.
OFF
• ON2: The device restarts. Timer resets.
• OFF: The unit does not restart after a power failure.
Note! Safety regulations for power failure memory vary by region.
Press the MENU button
S-05
Total operating hours. The display shows how many hours the device has been operating.
200
Press the MENU button
Service cycle
S-06
The display shows how many hours ago the service has been done. Reset counter after service
by pressing button - for 5 seconds. Service time can be changed by pressing - and + at the same
200
time.
Press the MENU button
Manual water control
S-07
You can add and discharge water with the - and + buttons e.g. when cleaning water reservoir,
troubleshooting or in service.
Press the MENU button
Temperature unit
S-09
Change the setting with the - and + buttons.
CELS (Celsius)
FAHr (Fahrenheit)
Press the MENU button
Dehumidifying
S-10
When the dehumidifying mode is on, dehumidifying interval will begin when the steam generator is
switched off. Length of the dehumidifying period is 1 h.
OFF > Dehumidifying OFF
ON > Dehumidifying ON
Press the MENU button
Display brightness
S-11
Use the - and + buttons to adjust the dispaly brightness.
Press the MENU button
EN
51