Auto-On/Off Socket Outlet For Power Tools; Manualclean *); Autoclean *); Antistatic Connection *) - Flex VCE 33 L MC Manual Original

D
FLEX VCE 33 L MC / VCE 33 L AC / VCE 44 L AC / S 44 L AC
GB
F
NL
I
N
S
DK
SF
E
P
3.2

Auto-On/Off socket outlet for power tools

GR
Appliance socket.
TR
The appliance socket is designed for electrical
auxiliary equipment; see technical data for refer-
ence.
SLO
1. Prior to plugging in an appliance, always switch
HR
off the machine and the appliance that is to be
connected.
2. Read the operating instructions to the appliance
SK
to be connected and observe the safety notes
contained in these.
CZ
An appliance socket with earthing contact is inte-
PL
grated in the machine. An external power tool can
be connected there. The socket features permanent
H
power on, when the electrical switch is in position
, i.e. the machine can be used as an extension
RO
cord.
In position
BG
and off by the power tool connected. Dirt is picked
up from the source of dust immediately. To comply
with regulations, only approved dust producing tools
RUS
should be connected.
EST
The maximum power consumption of the connected
electrical appliance is stated in section "Specifica-
tions".
LV
Before turning the switch to position
that the tool connected to the appliance socket is
LT
switched off.
3.3 ManualClean
The "MC" machine is equipped with a semi auto-
matic filter cleaning system, ManualClean. The filter
cleaning system must be actuated latest when the
suction performance is no longer sufficient. Regular
use of the filter cleaning feature maintains suction
14
Turn I:
Activate the machine
Turn :
Stop the machine. Permanent power
on socket
Turn :
Activate Auto-On/Off operation
Turn I + Off: Activate the
machine with deactivated automatic
filter cleaning function
Turn + Off: Activate Auto-
On/Off operation with deactivated
automatic filter cleaning function
Suction power control operation on
separate turning knob
CAUTION
the machine can be switched on
*)
performance and increases the lifetime of the filter.
For instruction see quick reference guide.
3.4 AutoClean
The "AC" machine is equipped with an automatic fil-
ter cleaning system, AutoClean. A frequent cleaning
cycle will automatically run during operation to en-
sure that suction performance is always at its best.
If suction performance decreases or in extensive
dust applications a manually filter cleaning operation
is recommended:
1. Switch off the machine.
2. Close the nozzles or suction hose opening with
the palm of your hand.
3. Turn the switch to position „I" and let the ma-
chine operate at full speed for approx. 10 sec-
onds with the suction hose opening closed.
If suction power is still reduced take out the filter and
clean mechanically or replace filter.
For certain applications, like wet pick up, it is recom-
mended to turn off the automatic filter cleaning sys-
tem. For details see chapter 3.1.
3.5 Antistatic connection
The machine is equipped with an antistatic
system to discharge any static electricity that
may develop during dust pick-up.
The antistatic system is placed in front part of the
motor top and creates an earth ground connection to
the inlet fitting of the container.
For proper function the use of an electrical conduc-
tive or antistatic suction hose is recommended.
1. When inserting the optional disposal bag make
sure the antistatic connection is kept.
3.6

Cooling air filter

To protect the electronics and motor, the machine is
equipped with a cooling air diffusor. Clean the cool-
ing air diffusor regularly.
For areas with a high concentration of fine dust in
the surrounding air it is recommended to equip the
machine with an optional cooling air filter cartridge to
ensure prevent dust from settling inside the air channels and
motor. Contact your local sales representative.
If cooling air filter is clogged by dust the over-
load protection switch in the motor can be
activated.
*) Optional accessories / Option depending on model
*)
*)
CAUTION
CAUTION
Original instruction