Hupfer OTA 47-36 Manual De Instrucciones página 40

Operating instructions
Step 1
Formula
Example
Step 2
Formula
Example
Distance
Adjustment
Open tray dispensers/open sided basket dispensers
Calculating the capacity
It is possible to calculate how many items stacking equipment can
hold.
The intermediate stack height h
following formula. Measure any missing values.
h = intermediate stack height
z
h = height between n items
n
h = height of 1 item
1
h = 120 mm
n
h = 20 mm
1
The capacity of the stacking equipment can be calculated using the fol-
lowing formula
h = intermediate stack height
z
h = lifting height of the plat-
st
form for baskets or trays
h = height of 1 item
1
n = number of items on the
platform for baskets or trays
(not stacked)
h = 458 mm
st
h = 20 mm
1
n = 3
Check the tension spring setting on the OKO
1. Place 2 baskets with a normal load on the platform for baskets.
�� The platform for baskets will sink.
2. Measure the distance between the top edge of the baskets and
the top edge of the spring case.
< 30 mm
Distance too small:
Unhook the tension
springs
Check the tension spring setting on the OTA
1. Place 20 trays on the platform for trays.
�� The platform for trays will sink.
of the items can be calculated using the
z
h =(( h – h )/ (n – 1))
z n 1
h = ((120 – 20) / (11 – 1)) = 10
z
Capacity = [((h – h ) / h
st 1
Capacity = [((458 – 20) / 10) + 1] × 3
Capacity = 132 items
(44.8 was rounded down to 44)
30 to 50 mm > 50 mm
Correctly adjusted Distance too large:
Hook on the tension
springs
) + 1] × n
z
15 / 24