Installing The Appliance - Fagor 3MWB-25BTCGX Manual De Instrucciones

Ocultar thumbs Ver también para 3MWB-25BTCGX:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

INSTALLING THE APPLIANCE

move all packaging materials and components.
- Re
- Check the oven for damage such as dents or door misalignment or breakage.
- Remove any protective film from the surface of the cabinet.
- Do not install the oven if it is damaged.
Do not remove the light brown mica cover bolted into the recess in order to
shield the microwave magnetron.
Installing
1. The appliance is designed for household use only.
2. The appliance can be used only after fitting in kitchen furniture.
3. For fitting instructions, please refer to "Installation guide"*.
4. Microwave oven should be installed in a cabinet with a width of 60 cm and a
height of 85 cm from the kitchen floor*.
Do not remove the legs located in the bottom of the appliance*.
Blocking the inlet and outlet openings may damage the microwave oven.
Place the oven as far away from radio and television as possible. Operating micro-
wave oven may cause interference to radio and television reception.
2. Insert the oven power plug into a standard household wall socket.
Make sure beforehand whether voltage and frequency are the same as on the
oven's rating plate.
WARNING: Do not install the oven on the gas hob or other heat producing ap-
pliance. In the event of such installation, the oven may be damaged and void the
warranty.
* Applicable to built-in appliances
56
Tabla de contenido
loading

Este manual también es adecuado para:

3mwb-25btcgn3mwb-25btcgb3mwb-20btcgn3mwb-20btcgx

Tabla de contenido