Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TOOLS
1
Crankshaft counterholder,
to be used as OEM T10025
2
Injection pump sprocket locking tool,
to be used as OEM 2064
3
Cramshaft adjusting tool,
to be used as OEM 2065A
4
Feeler gauge for cramshaft adjusting
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This engine timing tool set is used for checking and setting the engine timing on VW models
Transporter 2.4D (1995-2003), Crafter 2.5TDI (2006-2009) and LT with engine codes: AAB, AJA,
ACV, AGX, AHD, AHY, AJT, ANJ, APA, AUF, AVR, AXG, AXL, AYC, AYY, BBE, BBF, BJJ, BJK, BJL
and BJM.
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Be careful when working on hot engines because of the risk of burn injuries!.!
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
for VW 2.4 / 2.5 Diesel
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 8216
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
