Intended Use; Safety Informations - BGS technic 7744 Instrucciones De Uso

COMPONENTS
1 Spindle
2 Puller leg
3 Puller leg extension
4 Bridge
5 Thrust piece
6 Puller ball 5 mm
7 Puller ball 6 mm
8 Puller ball 8 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This puller set with interchangeable puller balls with diameters of 5, 6 and 8 mm and maximum range
of 100 mm is suitable for removing of ball bearings.

SAFETY INFORMATIONS

•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Be careful when working on hot engines because of the risk of burn injuries!
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in damage and serious injury.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
Lubricate the spindle thread before using the tool.
•
Always wear protective gloves and glasses when using the tool.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Bearing Puller Set
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
BGS 7744
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed