Preparation For Operation; Positioning Of The Unit - Steinberg Systems SBS-LZ-400B Manual De Instrucciones

1. Remaining time to the end of the program (timer)
2. Time unit - minutes
3. Number of the currently selected program
4. Time unit - seconds
5. Symbol - unit in operation
6. Symbol - cover open
7. Speed or centrifugal force value
8. Type of displayed value - speed
9. Type of displayed value - relative centrifugal force
3.2.

Preparation for operation

POSITIONING OF THE UNIT

The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain a
minimum clearance of 30 cm from any wall of the unit. Keep the unit away from
any hot surfaces. Always operate the unit on a level, stable, clean, fireproof and
dry surface and out of the reach of children and persons of impaired mental,
sensory and intellectual functions. Place the unit in such a way that the mains plug
can be reached at any time. Ensure that the power supply to the unit corresponds
to that specified on the identification plate!
ASSEMBLY OF THE UNIT
Place the unit on a flat, stable surface so that all four rubber feet touch the surface
of the ground.
Caution! The power outlet must be grounded. This will reduce the risk of electric
shock.