Use Warnings - Orbea BLUE PAPER URRUN 2022 Manual Tecnico

100 | ORBEA
ADAPTATIVE CHARGING CURRENT
The Smart Charger RS recognizes what battery it is con-
nected to (internal battery 540Wh or Range Extender
252Wh) and adapts the charging current.
The charging current of the internal battery is 4A (100-240V).
32 SMART CHARGER ORBEA RS 4A-2A 42V
Mains cable options EU, US, UK, AUS
ART Nº: XA82
Smart charger Orbea RS 4A-2A 42V
Mains cable options
EU, US, UK, AUS
USING THE RS SMART CHARGER
Read the charging the RS batteries in the Use of Urrun section of this manual to know how to use the Smart
Charger to charge the internal battery and the Range Extender.
MEANING OF THE SMART CHARGER LED
LED
TECHNICAL MANUAL
The Smart Charger charges the internal battery to up to
80% in 3 hours, and then reduces the charging current
until it reaches 100% to protect the battery.
The charging current of the Range Extender is 2A (100-240V).
QTY.
1
BEHAVIOUR STATUS
Blinking blue LED Charger connected to an outlet
but not connected to the battery
Blue LED fades in and out Charger charging the battery
cyclically
Still blue LED Charge completed
Still red LED Charging error. Consult the
troubleshooting table below
B LUE PAP ER U RRU N · 2022
RS SMART CHARGER TROUBLESHOOTING
PROCEDURE
LED POSSIBLE ERROR
(Follow solutions
in descending order)
Protection.
Current too high
Protection. Shortcircuit.
Protection.
Temperature too high.
Protection. Standby
Protection. Abnormal
communication.
Protection.
Voltage too high
RS SMART CHARGER.

USE WARNINGS

Consult the Relevant Information about the RS Batteries to
read more about the recommended use and maintenance
procedures of the RS Smart Charger.
ORBEA | 101
SOLUTION
· Disconnect the charger.
· Inspect the connector and the charging port for debris, humidity
or foreign objects.
· If the problem persists, contact an authorized dealer.
· Disconnect the charger.
· Inspect the connector and the charging port for debris, humidity
or foreign objects.
· If the problem persists, contact an authorized dealer.
· Wait until the charger temperature is within the recommended
charging temperature range.
· If the problem persists, contact an authorized dealer.
The time the charger has been connected to the battery an/or an
outlet without charging has exceeded the stablished limit.
Contact an authorized dealer.
· The battery´s voltage is too high.
· Contact an authorized dealer.
E N