Safety And Protective Devices; Product Overview (02); Scope Of Supply (03); Grass Trimmer, Brush Cutter And Brush Saw Safety Warnings - AL-KO solo MT 42.2 Manual De Instrucciones

Grass trimmer, brush cutter and brush saw safety warnings

Symbol Meaning
The distance between the attach-
ment and persons not involved in
the work must be at least 15 m in
the entire area around the user.
Do not use a saw tooth blade!
Protect the appliance from rain and
moisture!
2.5

Safety and protective devices

Guard plate
Protects the operator from contact with the rotating
blade or the cutting line and objects flying out. In ad-
dition, a protective ring is fitted on the guard plate.
2.6 Product overview (02)
No. Component
1 Trimmer and brush cutter attachment
2 Spool head
3 3-toothed blade
4 Guard plate
5 Coupling for basic appliance
6 Cover for blade
2.7

Scope of supply (03)

No. Component
1 Motor head with shaft
2 Guard plate
3 Spool head with spool
4 3-toothed blade
5 Washer
6 Cover
7 Locknut
8 Combination spanner
443447_a
No. Component
9 Retaining pin
3 GRASS TRIMMER, BRUSH CUTTER
AND BRUSH SAW SAFETY WARNINGS
(a) Do not use the machine in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck
by lightning.
(b) Thoroughly inspect the area for wildlife
where the machine is to be used. Wildlife may
be injured by the machine during operation.
(c) Thoroughly inspect the area where the ma-
chine is to be used and remove all stones,
sticks, wires, bones, and other foreign ob-
jects. Thrown objects can cause personal injury.
(d) Before using the machine, always visually
inspect to see that the cutter or blade and the
cutter or blade assembly are not damaged.
Damaged parts increase the risk of injury.
(e) Before use, check the supply cord and any
extension cord for signs of damage or aging.
Do not use the machine if the cord is dam-
aged or worn. If the cord is damaged or worn
during use, switch off the machine and do not
touch the cord before disconnecting it from
the supply. A damaged supply cord or extension
cord may result in electric shock, fire and/or seri-
ous injury.
(f) Follow instructions for changing accesso-
ries. Improperly tightened blade securing nuts or
bolts may either damage the blade or result in it
becoming detached.
(g) The rated rotational speed of the blade
must be at least equal to the maximum rota-
tional speed marked on the machine. Blades
running faster than their rated rotational speed
can break and fly apart.
(h) Wear eye, ear, head and hand protection.
Adequate protective equipment will reduce per-
sonal injury by flying debris or accidental contact
with the cutting line or blade.
(i) While operating the machine, always wear
non-slip and protective footwear. Do not oper-
ate the machine when barefoot or wearing
open sandals. This reduces the chance of injury
to the feet from contact with the moving cutters or
lines.
(k) While operating the machine, always wear
long trousers. Exposed skin increases the likeli-
hood of injury from thrown objects.
17