Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch ACS 810 Manual Original

1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or
people in the vicinity. Warning notices also indicate
the consequences of the hazard as well as preventive
action. Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
Consequences of hazard in the event of
symbol
failure to observe action and information
given.
¶
Hazard prevention action and
information.
The key word indicates the likelihood of occurrence
and the severity of the hazard in the event of non-
observance:
Key word Probability of
occurrence
DANGER Immediate
impending danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property
!
damage.
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several
2. operation steps.
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible

result intermediate result.
Final result There is a visible final result on
"
completion of the instruction.
1.2

On the product

!
Observe all warning notices on products and
ensure they remain legible.
¶
Wear safety goggles.
¶
Wear protective gloves.
¶
Protect against dampness and moisture.
Robert Bosch GmbH
Severity of danger if
instructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | ACS 810 | 37 |
2.

Important notes

Before start up, connecting and operating
Bosch products it is absolutely essential
that the operating instructions/owner's
manual and, in particular, the safety
instructions are studied carefully. By doing so you can
eliminate any uncertainties in handling Bosch
products and thus associated safety risks upfront;
something which is in the interests of your own safety
and will ultimately help avoid damage to the device.
When a Bosch product is handed over to another
person, not only the operating instructions but also
the safety instructions and information on its
designated use must be handed over to the person.
2.1

User group

The product may be used by skilled and instructed
personnel only. Personnel scheduled to be trained,
familiarized, instructed or to take part in a general
training course may only work with the product under
the supervision of an experienced person.
All work conducted on pressurized equipment may
be performed by persons with sufficient knowledge
and experience in the field of refrigeration, cooling
systems and coolants and, also be aware of the risks
involved in the use of pressurized devices.
en
|
1 689 989 601 2020-12-01