Special Safety Instructions - Rothenberger R600 VarioClean Instrucciones De Uso

b)
WARNING! Use power tools only with specifically designated battery packs
and respectively battery types. Use of any other battery packs may create a risk
of explosions, injury and fire.
c) When battery pack is not in use, keep it away from other metal objects like paper
clips, coins, keys, nails, screws, or other small metal objects that can make a connec-
tion from one terminal to another. Shorting the battery terminals together may cause
burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a damaged or modified battery. Damaged or modified batteries can behave
unexpectedly and lead to fires, explosions or injuries.
f) Do not expose a battery for fire or high temperatures. Fire or temperatures above 130°C
(265°F) can cause an explosion.
g) Follow all the instructions for charging and never charge the battery or the cordless
tool outside the temperature range specified in the operating instructions. Incorrect
charging or charging outside the permitted temperature range can destroy the battery and
increase the fire risk.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical re-
placement parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged batteries. All maintenance of batteries should only be carried out
by the manufacturer or authorised customer service points.
1.3

Special safety instructions

R600 VarioClean:
Wear appropriate guide gloves (e.g. riveting glove left 72120, right 72121) to guide the spiral.
Damaged riveting gloves must not be worn again. (Riveting gloves are not personal protective
clothing as per 2016/425/EU - see Section 5.6 as well).
When using riveting gloves, always ensure that you also wear disposable latex gloves inside the
riveting gloves for hygienic reasons. (Damaged latex gloves must not be worn again.)
The spirals must be removed completely from the holding cage before the machine is turned on.
Wear suitable safety shoes when carrying out the cleaning work (insulation).
Always ensure that the pipe cleaning machine is switched to "0" or OFF before you insert the
plug in an electrical socket.
Whenever you use electrical devices, always adhere to the specified voltage and generally work
with a protective tube and safety gloves.
To prevent damage, use this machine and its accessories only to clean waste water pipes —
never chimneys, wells, etc.
To prevent damage to the pipes or pipe bends, do not modify tools by grinding, etc.
Use a camera system to spot the cause of the pipe blockage.
Only use electric lines that have been correctly installed as per the "VDE regulations".
Mechanical pipe cleaning should always be undertaken from above in the direction of the stop
plug.
Ensure that no water taps leading to the pipe to be processed are actuated during the pipe
cleaning. Congestion can occur here!
Never leave the machine unattended during pipe cleaning!
Protective covers: All of the rotating parts are made safe through the use of protec-
tive covers. Removing and/or operating without these protective covers is strictly
forbidden!
Secure the working site (the road, the shaft) so that no non-involved people will suffer injuries
and always cover up open shafts or gullies.
18 ENGLISH