Mennekes AMTRON Professional+ 7,4 Manual De Instrucciones Y De Instalación página 53

Table of contents
1 About this document..................................
1.1 Contact ................................................................ 3
1.2 Warning notices ................................................ 3
1.3 Symbols used .................................................... 3
2 For your safety ............................................
2.1 Target groups .................................................... 4
2.2 Intended use...................................................... 4
2.3 Improper use ..................................................... 4
2.4 Basic safety information.................................. 5
2.5 Safety labels....................................................... 5
3 Product description ....................................
3.1 Main features .....................................................
3.2 Rating plate ........................................................ 8
3.3 Delivery contents.............................................. 9
3.4 Product structure .............................................. 9
3.5 Multi-function button........................................ 10
3.6 Operating modes.............................................. 10
3.7 Solar charging modes ..................................... 11
3.8 LED information panel..................................... 11
3.9 Charging connections ..................................... 12
4 Technical data............................................. 14
5 Installation ................................................... 16
5.1 Select location................................................... 16
5.1.1 Permissible ambient conditions.................... 16
5.2 Preparatory work on site ................................ 16
5.2.1 Upstream electrical installation..................... 16
5.2.2 Protective devices............................................ 17
5.3 Transporting the product................................ 18
5.4 Opening the product ....................................... 18
5.5 Installing the product on the wall ................. 19
5.6 Electrical connection ....................................... 20
5.6.1 Network configurations................................... 20
5.6.2 Power supply ..................................................... 20
5.6.3 Shunt release..................................................... 20
5.7 Set the product up for single-phase oper-
ation ..................................................................... 21
5.8 Networking the product.................................. 22
6 Commissioning ........................................... 23
6.1 Switching on the product ............................... 23
6.2 Check the power supply................................. 23
6.3 Connections on the ECU ................................ 24
6.4 Inserting the SIM card ..................................... 24
3 6.5 Setting up a connection to the ECU..............24
6.5.1 Via USB .................................................................25
6.5.2 Via Ethernet .........................................................25
6.5.3 Via the network...................................................26
4 6.6 Structure of the web interface ........................26
6.6.1 Operating the web interface ...........................26
6.6.2 View status information ....................................27
6.7 Setting the maximum charging current ........27
6.8 Integrating the product into a local net-
work .......................................................................27
7 6.9 Setting operating modes..................................27
7 6.9.1 "Standalone Autostart" operating mode......27
6.9.2 "Standalone with authorisation" operating
mode......................................................................28
6.9.3 "Standalone Backend-System" operating
mode......................................................................28
6.9.4 "Networked" operating mode.........................29
6.10 Setting other functions......................................29
6.10.1 Connecting an external energy meter..........29
6.10.2 Downgrade when using an energy meter
type Siemens PAC2200...................................32
6.10.3 Activate the interface (Modbus TCP
server) for energy management systems ....33
6.10.4 Activating the interface (EEBus) for energy
management systems .......................................33
6.10.5 Activating the interface (SEMP) for energy
management systems .......................................34
6.10.6 Setting Autocharge............................................34
6.11 Reset the configuration to the factory set-
ting .........................................................................36
6.12 Testing the product ...........................................36
6.13 Closing the product ...........................................36
7 Operation ...................................................... 37
7.1 Authorisation ....................................................... 37
7.2 Charging the vehicle ......................................... 37
7.3 Multi-function button .........................................38
7.3.1 Switch the residual current device and the
circuit breaker back on again .........................39
7.3.2 Check the residual current device.................39
7.4 User web interface.............................................39
7.4.1 Calling up the user web interface..................39
7.4.2 Structure of the user web interface...............40
EN
1