Installation; Installation Data; Rack-Mount Installation - Tripp-Lite AG-05D9 Serie Manual Del Propietário

3 Installation

Notes:
• Before installation, read section 1.1 Important Safety Instructions thoroughly.
• Each model contains internal batteries.
• Only qualified personnel should perform iinstallation.

3.1 Installation Data

Item
Installation Environment
UPS Dimensions [H x W x D]
Operating Temperature
Relative Humidity (non-condensing)
Max. Altitude (without de-rating)
Input Power Connection
Output Power Connection
Battery Power Connection
Air Inlet
Air Outlet

3.2 Rack-Mount Installation

You can rack mount the UPS in a 4-post frame or rack enclosure.
Notes:
• The UPS draws cooling air from its front. If your rack has a door on the front, make sure there is sufficient clearance between the UPS
vents and the rack door.
• It is strongly recommended that at least two people lift the unit when rack mounting. If there is only one person available, we suggest that
the UPS internal batteries be removed for less weight before rack mounting. After rack mounting, re-install the internal batteries.
• Use only the provided bracket ears and rail kits for rack-mount installation. Never depend on lower devices to support the UPS.
1
Attach the included bracket ears to the lateral
mounting holes of the UPS.
Specification
Indoor only
1.5kVA: 1.7 x 17.3 x 21.8 in. (44 x 440 x 554 mm)
700VA-1200VA: 1.7 x 17.3 x 20 in. (44 x 440 x 509 mm)
32°F~104°F (0°C~40°C)
0%~95%
3,280 ft. (1,000 m) above sea level
Rear
Rear
Rear
Front
Rear
1
18