Lcd Display - Tripp-Lite AG-05D9 Serie Manual Del Propietário

2 Features
Multi-Function Button Description
Note: When the LCD backlight is off, press any button mentioned above to illuminate the display and enable each button function.

2.2.3 LCD Display

Icon
1. Entering Setup Mode
Simultaneously press these two buttons for 3 seconds to enter setup mode.
2. Exiting Setup Mode
In setup mode, press these two buttons simultaneously for 3 seconds to exit setup mode.
Icon Name Description
Input AC Indicates the input source status.
Icon
1. On: The AC input is within the acceptable input range.
2. Flashing: The AC input is out of the acceptable input range, but is still
sufficient to charge the battery.
3. Off: The AC input is out of the acceptable input range and is not sufficient to
charge the battery.
Load Bank Indicates the output status.
Icon
1. On: There is output to the load bank 1/load bank 2.
2. Off: There is no output to the load bank 1/load bank 2.
Battery Power Indicates the battery power status.
Icon
1. ON: Battery power is on.
2. OFF: Output is not supplied by the battery power.
Standby Illuminates when the UPS is operating in stand- by mode.
Mode Graph
Line Mode Illuminates when the UPS is operating in line mode.
Graph
AVR Mode Illuminates when the UPS is operating in AVR mode.
Graph
Battery Mode Illuminates when the UPS is operating in battery mode.
Graph
10