Main Board Wiring Connections - Mettler Toledo IND570 Manual Del Usuario

THE USB INTERFACE IS NOT CERTIFIED FOR USE WITHIN DIVISION 2 OR ZONE 2/22 HAZARDOUS AREAS.
2.4.5.

Main Board Wiring Connections

Once the IND570 terminal harsh enclosure is open, connections can be made to the terminal strips
on the main board, as shown in Figure 2-23.
It is not necessary to open the panel mount enclosure (Figure 2-24) to make these connections.
IDNet or SICSpro
Connector
Chassis Ground
Connection
Incoming
30205319 | 04 | 08/2016
COM1
USB Host
Figure 2-23: Analog Main Board in Harsh Enclosure
Power
Figure 2-24: Panel Mount Enclosure Connections, including IDNet Scale Interface
METTLER TOLEDO IND570 Weighing Terminal Installation Manual
NOTICE
Incoming power
Analog
load cell
USB
COM1
2-15