6.3 Air filters
6.3.1
Air filters on delivery line
The units are fitted with filters on the air supply side.
The filters can be cleaned or replaced by opening the panels in the unit that bear a pictogram for access.
Fig. 24 Panel giving access to filters
Filters are locked by levers ("A") that are connected to the movable portion of the filter holder rail ("B"). The levers
must be released for filter extraction.
B
A
Fig. 25 Filter locking system
The filter locking system is required when one single filtration stage (flat filters) needs to be housed or when an
additional stage of rigid bag filters needs to be installed.
Filters having a higher filtration level may be requested as options at the time of ordering the unit, in which case they
are installed at the factory. If they are requested at a later stage, installation will require a modification to the locking
system in the filter holder.
If flat filters "ePM10 50%" are required, these must be installed in the same position as the "Coarse 75%" filters.
Translation from original instructions
We reserve the right to make changes without any prior notice.
Packaged Rooftop
UATYA
48
4P645202-2