Control Panel Lock - Mx Onda MX-PIP2195 Manual De Instrucciones

TIMER
The timer will allow you to set a time for automatic shutdown, this time can vary
between 1 minute and 3 hours. To set the timer, you must first select a cooking
mode.
To set the timer, follow the steps below:
1. With the hob on and a pan on the cooking zone, choose a cooking mode (if
necessary change the power level or temperature).
2. Momentarily touch button 7 (
show "0:00" flashing.
3. Touch with your fingertip the touch button 4 (
decrease the time in jumps of 1 minute respectively, if you touch and
maintain the contact with the fingertip on these buttons, the jumps will be of
10 minutes. Screen 3 will show the time in minutes.
4. Once the time has been selected, screen 3 will alternately show the
selected power or temperature and the remaining time for automatic
shutdown.
5. During cooking you can increase or decrease the power or the
temperature, using buttons 4 (
6. To cancel the timer, touch the 7 (
another cooking mode.
Note: If when activating the timer, when the display shows flashing the
indication "0:00" if 5 seconds elapse without selecting the time for the
switch-off, the timer mode will automatically be deactivated.

CONTROL PANEL LOCK

The induction hob incorporates a locking device, which deactivates the
operation of the function selection button 2 (
decrease 5 (
The control panel lock prevents the induction hob from turning on by mistake or
by mistake (if the hob is off), or from varying the power or the chosen
temperature (if the hob is operating).
To lock the control panel, touch the 8 (
display 3 will show "
To unlock the control panel, touch and hold the 8 (
fingertip for 2 seconds, when the control panel is unlocked the "
will disappear from the screen.
) buttons and the timer 7 (
Loc ".
) with your fingertip and the display 3 will
) or 5 ( ).
) button with your fingertip or choose
), the increase 4 (
).
) button with your fingertip and the
10
) or 5 ( ) to increase or
) button with your
Loc
) and
" indication