Using The Touch Controls - Mx Onda MX-PIP2195 Manual De Instrucciones

USING THE TOUCH CONTROLS

The controls are responsive to touch, so there is no need to apply any
pressure.
Use the entire part of the fingertip, not the tip.
You will hear a beep every time a touch is detected.
Make sure the controls are always clean, dry and that there are no objects
(for example, a utensil or cloth) covering them. Even a thin layer of water
can make the controls difficult to operate.
PRESET COOKING MODES
The induction hob incorporates 6 preset cooking modes (heating, boiling,
soups, stewing, frying and roasting), in this way you can immediately access a
power level or ideal temperature for the type of food you want to cook. You
must take into account that the power and / or temperature are preset based on
an average quantity and temperature of the food, that is, it may be necessary
to change the power or temperature of the selected mode, and this is due to
the following causes:
a. Amount of food; It is not the same to cook for 2 people as for four, the
amount varies.
b. Food temperature; if the food is cold (just taken from the refrigerator) or if it
is at room temperature.
In any selected mode you can modify the power or the temperature and thus
adapt it to the quantity or type of food using the increase 4 (
5 ( ) buttons.
INDUCTION HOB ON AND OFF
1. Place the pan on the cooking zone, remember that it must be suitable for
induction and its base must be between 12 and 26 cm.
2. To turn on the hob, touch button 1 (
show the indication "ON" and the buzzer will emit a "beep".
3. Using the function selector 2 (
modes, see the next section.
4. To turn off the hob, touch button 1 (
screen will turn off and the buzzer will emit a "beep".
) with your fingertip, the display will
) select one of the 6 preset cooking
) again with your fingertip, the
8
) or decrease