Side Rest, Stepless Height Adjustable, Non-Locking; Adjusting The Height; Antitipper - Küschall COMPACTattract Manual Del Usuario

Compact attract
3. Tighten the screw.
4. Perform the setting on both sides.
3.7 Side rest, stepless height adjustable,
non-locking
WARNING!
Risk of injury
The side rests are not locked and can be easily
pulled out upwards.
– Do not lift or transfer the wheelchair using the
side rests.
– Do not use the side rests for transportation when
carrying the wheelchair up- or downstairs.
Removing
1. Pull the side rest by the arm cushion out of the holder.
2. To adjust how easy or difficult it is to pull the side rest out of
the holder, change the degree to which the screws C are
tightened.
14
All manuals and user guides at all-guides.com
Fitting
1.

Adjusting the height

1.
2. Move the armrest upwards or downwards until you reach
3. Tighten the screw A.
4. Perform the setting on both sides.

3.8 Antitipper

An antitipper prevents the wheelchair from tipping backwards.
Push the side rest into the holder.
Loosen the screw A of the retaining plate B.
the desired height.
WARNING!
Risk of overturning
Antitippers that are incorrectly set or no longer
working can lead to overturning.
– Always check that the antitipper is working
before using the wheelchair and have it set or
readjusted by a specialist dealer when required.
WARNING!
Risk of overturning
On uneven or soft ground, the antitipper can sink
into potholes or directly into the ground, thereby
curtailing or eliminating its safety function.
– Only use the antitipper when travelling on even
and firm ground.
1589081-A