1. TECHNICAL INFORMATION
1.1 Use
The AJ92 CHALLENGE machine is a two-axle self-propelled riding mower designed for mowing even,
maintained grass areas with a maximum vegetation height of 10 cm, e.g. in parks, gardens
and sports fields, possibly on minor slopes, on which there are no foreign objects (fallen branches,
rocks, solid items, etc.). The incline of the slope must not exceed 10° (17%).
Any use of this self-propelled mower that is not mentioned in this manual or that
extends beyond the range of use mentioned is considered use that violates the
purpose. The user bears exclusive responsibility for all such use, and the manufacturer is
not responsible for damages arising therefrom. The user is also responsible for adhering
to the conditions prescribed by the manufacturer for operation, maintenance and repair of
this machine, which must be used, maintained and repaired only by persons who are
familiar with it and who have been instructed in safety.
Only manufacturer-approved accessories can be attached to the machine. Using
non-approved accessories will immediately void the warranty.
1.2 MAIN PARTS OF THE MOWER
The AJ92 riding mower consists of the following basic sections:
(1) Frame and bumper
The frame and bumper support most of the machine's main parts.
(2) Front axle and wheels, including steering mechanism
The front axle allows the wheels to be steered. Steering is done with a steering wheel.
(3) Mowing mechanism
The mowing deck mows and collects the grass. It is located under the machine. It consists
of a cover, main plate and two mowing blades.
(4) Grass removal tube
It connects the mowing deck with the grass catcher. Through here the grass passes to the
grass catcher.
(5) Transmission and rear-wheel drive
The transmission box and hydrostatic transmission are for shifting gears when driving.
(6) Bypass
1.2
The bypass lever is for engaging and disengaging power from the transmission to the rear
wheels. It is located near the left rear wheel and, depending on the machine's design, is
either in front of or behind the wheel.
(7) Grass catcher
The grass catcher, located at the back of the machine, and consists of a steel tube frame,
a fabric bag and a dumping lever.
(8) Driver's area
The comfortable seat allows easy access to all of the machine's controls.
(9) Bonnet, engine, wiring and battery
The bonnet is a combination of plastic and metal covers that appropriately cover the machine's
electrical and mechanical parts. Located under the hood is a 4-stroke petrol engine that is
secured to the frame. The battery is located in the storage space under the steering wheel.
19