Technical Information - EMAK STARJET AJ102 Manual De Usuario

1. TECHNICAL INFORMATION

1.1 Use
Model AJ102, AJ102 4X4 or AG122 machines bearing the STARJET brand are double-axled self-
propelled lawn mowers that are intended for cutting flat, maintained lawns with a maximum
growth height of 10 cm, e.g., in parks, gardens and playgrounds, or on gentle slopes that do not
contain foreign objects (fallen branches, stones, solid objects, etc.). The slope must not exceed
10° (17%), when using the 4 x 4 drive, the slope must not exceed 15° (27%).
The machine of type AJ110 is a biaxial, self-propelling mowing machine, destined for mulching of
maintained and non-maintained growths to a height of an approximate minimum of 60 cm
1 x a year, for instance in meadows or parks, possibly on moderate slopes, free from extraneous
objects (fallen branches, stones, solid objects and the like.). The slope must not exceed 10° (17%)
and when using 4 x 4 drive, the slope must not exceed 15° (27%).
Any use of this self-propelled mower that is not mentioned in this manual or that
extends beyond the range of use mentioned is considered use that violates the
purpose. The user bears exclusive responsibility for all such use, and the manufacturer is
not responsible for damages arising therefrom. The user is also responsible for adhering
to the conditions prescribed by the manufacturer for operation, maintenance and repair of
this machine, which must be used, maintained and repaired only by persons who are
familiar with it and who have been instructed in safety.
Only manufacturer-approved accessories can be attached to the machine. Using
non-approved accessories will immediately void the warranty.
1.2 MAIN PARTS OF THE MOWER
AJ102, AJ202 4X4, AJ110 and AG122 lawn mowers consist of the following basic assemblies:
(1) Frame and bumper
The frame and bumper support most of the machine's main parts.
(2) Front axle and wheels, including steering mechanism
The front axle allows the wheels to be steered. Steering is done with a steering wheel.
(3) Mowing mechanism
The mowing mechanism of machines AJ102, AJ102 4x4, AG122 ensures the mowing and
collection of grass. It is located under the machine and consists of a cover, a main plate and
two mowing knives.
The mowing mechanism of machine AJ110 provides the mulching of grass without collection.
It consists of a cover, a belt manifold and six mowing knives arranged in pairs on three
rotating shafts.
(4) Grass removal tube
1.2
Connects the mowing mechanism to the grass catcher. Here the mown grass passes into the
the storage container (machine AJ110 is not provided with a tunnel).
(5) Transmission and rear-wheel drive
The transmission box and hydrostatic transmission are for shifting gears when driving.
(6) Bypass
The bypass lever is for engaging and disengaging power from the transmission to the rear
wheels. It is located near the left rear wheel and, depending on the machine's design, is
either in front of or behind the wheel.
(7) Grass catcher
The grass catcher, located at the back of the machine, and consists of a steel tube frame, a
fabric bag and a dumping lever.
23